Strain-rate dependence of surface/subsurface deformation mechanisms during nanoscratching tests of GGG single crystal

Constant- and varied-depth nanoscratching tests of GGG single crystal were carried out at different scratching velocities. The morphologies of the scratched grooves and chips were analysed using scanning electron microscope. The experimental results indicated that higher scratching velocity led to shallower penetration depth, shallower residual depth, and larger continuous chips. Increasing the scratching velocity could effectively improve the plasticity and reduce the brittle-to-ductile transition depth of GGG single crystal. Based on the contact stress and contact area between the analysed sample and Berkovich indenter, a model for predicting the penetration depth was developed, which took into account the strain rate effect and elastic recovery of materials. The model was verified using constant- and varied-depth nanoscratching tests, and the predicted and experimental results were in good agreement. Subsurface damage underneath the ductile surface was characterised using transmission electron microscope. The TEM results demonstrated that higher scratching velocity led to the slipping planes appearing in more directions, which prevented the generation of long slipping plane and reduced the depth of the damage layers. The plastic deformation of GGG at the scratching velocity of 100 μm/s was dominated by poly-crystalline nanocrystallites and amorphous phases, and was similar to that at the low scratching velocity. This study provided a fundamental understanding of the strain-rate dependence of surface/subsurface deformation mechanisms of GGG during ultra-precision machining.     

高熵合金的抗辐照性能研究进展

高熵合金作为一种新型多主元固溶体合金，成分复杂、全局无序，且具有多主元效应，表现出较为优异的综合性能，有望作为新型抗辐照结构材料应用于先进核能反应堆系统。本文介绍了目前高熵合金抗辐照性能的研究现状，主要涉及高熵合金辐照缺陷演化、微观结构变化和性能退化等辐照损伤演化过程，梳理了多主元效应对辐照损伤演化过程的影响规律。针对高熵合金的抗辐照性能研究，总结了目前高熵合金的几种抗辐照损伤机制，归纳了高熵合金抗辐照性能研究存在的问题，以及对高熵合金后续的研究方向进行了展望。     

The residual zonal flow in tokamak plasmas with a poloidal electric field

In a tokamak plasma with auxiliary heating by cyclotron waves, a poloidal electric field will be produced, and as a consequence influence the residual zonal flow(RZF) level. The poloidal electric field can also be induced through biasing electrodes at the edge region of tokamaks.Numerical evaluation for a large aspect ratio circular cross section tokamak for the electron cyclotron wave heating indicates that the RZF level decreases significantly when the poloidal electric field increases. Qualitatively, the ion cyclotron wave heating is able to increase the RZF level. It is difficult to apply the calculation to the real cyclotron wave heating experiments since we need to know factors such as the plasma profiles, the exact power deposition and the cross section geometry, etc. It is possible to use the cyclotron wave heating to control the zonal flow and then to control the turbulence level in tokamak experiments.     

A simple explicit single step time integration algorithm for structural dynamics

In this article, a new single-step explicit time integration method is developed based on the Newmark approximations for the analysis of various dynamic problems. The newly proposed method is second-order accurate and able to control numerical dissipation through the parameters of the Newmark approximations. Explicitness and order of accuracy of the proposed method are not affected in velocity-dependent problems. Illustrative linear and nonlinear examples are used to verify performances of the proposed method.     

A mechanism based on finger-sliding behavior for designing radial menus

Human behavior about sliding their fingers on touch screens needs to be understood for the design of radial menus. For this purpose, data about the angles of finger sliding in performing radial pointing to eight predefined directions were collected. The optimal angle ranges and boundaries for these directions were then determined by the proposed mechanism. Consistent with previous research, results showed that the deviations of slide angles for the four diagonal directions were larger than that for the four orthogonal directions. Therefore, to reduce overall pointing errors, the angle ranges for the diagonal directions should be wider than that for the orthogonal directions. Based on the proposed mechanism, the total probability of pointing errors could be limited to 0.05%, compared to the error of 2.00% if the eight angle ranges were evenly divided by the radii of a regular octagon. Besides the angles, the lengths and starting points of the slides were reported and discussed along with the oblique effect, judder effect, and screen orientation. Possible applications of the proposed mechanism for dynamic and personalized radial menus are addressed. Further research would be worthwhile to examine the effects of screen orientation and the number of predefined directions on pointing performances. Moreover, extending the research to mid-air sliding gestures would be of interest and value in designing three-dimensional radial menus.Relevance to industryThe proposed mechanism could effectively enhance the accuracy of the selections through radial menus, and could be applied to the remote controls via smart handheld devices.     

Does placebo effect exist in contact lens discomfort management?

PurposeTo study the effect of daily disposable contact lens (DDCL) refitting in monthly contact lens (CL) wearers suffering from contact lens discomfort (CLD), and to assess if there is a placebo effect associated with this CLD intervention.MethodsSymptomatic CL wearers, according to the Contact Lens Dry Eye Questionnaire 8 (CLDEQ-8 ≥ 12 points), were divided into two groups. The study group was provided with DDCLs (delefilcon A) and the control group with a masked pair of their habitual monthly CLs (placebo effect) and were assessed after one month. Then, the control group was provided with the same DDCLs and evaluated one month later. The symptoms were recorded with the CLDEQ-8 and global rating of change scale (GRCS). Non-invasive tear break-up time (NITBUT), conjunctival hyperaemia, fluorescein staining, and lid wiper epitheliopathy (LWE) were evaluated. Changes between visits, groups, and the effect of each intervention were analysed.ResultsThirty-one participants (mean age: 23.2 ± 5.3 years) were recruited. The study group (n = 14) showed an improvement of -39.6 ± 25.8 % (p < 0.001) in CLDEQ-8 and 31.3 ± 14.6 points in GRCS (p < 0.001) after one month of DDCL use, while no changes in clinical tests were found. In the control group (n = 17), symptoms improved significantly after wearing the masked monthly CL (CLDEQ-8: -26.1 ± 31.0 %, p = 0.03; GRCS: 14.9 ± 17.0, p = 0.002), however a worsening in bulbar (26.5 ± 40.0 %; p = 0.02) and limbal hyperaemia (21.6 ± 34.7 %, p = 0.02) and an improvement of -19.1 ± 37.0 % (p = 0.049) in LWE was found. When the control group was fitted with the DDCL, improvements in GRCS (20.5 ± 25.5, p = 0.02), NITBUT (37.9 ± 42.3 %, p = 0.002), and conjunctival staining (-47.1 ± 59.9 %, p = 0.005) were noted.ConclusionsRefitting symptomatic monthly CL wearers with Delefilcon A DDCL is effective in reducing symptoms related to CLD. However, clinicians and researchers must be aware of the existence of a placebo effect when assessing the effectiveness of any CL refitting.     

DCNN深度特征与交替方向乘子的相关滤波跟踪

针对采用相关滤波的判别式目标跟踪遇到的瓶颈问题：由于目标快速移动引起边界效应，使得相关滤波器在学习与更新过程中可能会引入错误，最终错误的累积将导致跟踪失败。在采集深度学习特征与样本相似性度量的基础上，提出一种引入交替方向乘子方法的改进相关滤波目标跟踪算法，选择DCNN深度特征有效地表征待跟踪目标的初始状态，通过在线分类过程中样本相似性比对与半监督学习，辅助解决相关滤波器在学习过程中存在的自学习问题。所提目标跟踪算法特别适合训练样本为持续获得的、同时存储空间较小的机器学习过程，提高目标在快速运动与部分遮挡等复杂情况下的跟踪成功率，针对VOT2016标准测试视频的实验表明：当目标面临快速运动时，对比CN、SAMF、STC算法，所提DA-CFT跟踪算法将跟踪成功率分别由60.4%～73.4%、67.2%～82.9%、80.9%～88.1%提升至85.6%～91.0%。     

Inductive effect in Mn-doped ZnO nanoribon arrays grown on Ni foam: A promising key for boosted capacitive and high specific energy supercapacitors

Transition metal oxides have been explored in supercapacitor applications owing to their safety, low cost, high specific capacitance and high electrochemical activity. Among all transition metal oxides, zinc oxide based materials show remarkable response for designing the supercapacitors with high electrochemical activity. Here in, Mn doped ZnO (Zn_1-xMn_xO₃ with x = 0, 0.25, 0.50, 0.75 and 1) was synthesized by a facile hydrothermal method. Doping of Mn into the ZnO increased the surface area and decease the charge transfer resistance for the Zn_0.5Mn_0.5O₃. All the synthesized materials were characterized by x-ray diffraction (XRD), scanning electron microscopy SEM), BET, electrochemical tests and other various analytical techniques to confirm the structural, morphological, textural and suprcapacitive properties. The synthesized material Zn_0.5Mn_0.5O₃ having the porous nanoribons structure with BET surface area (2490 cm²/g). The electrochemical studies showed significantly enhanced response toward pseudocapacitive nature. The synthesized material exhibited the excellent specific capacitance (515F/g), specific energy (28.61 Wh/kg) and specific power (1000 W/kg) at current density of 2 mA/g. Such impressive and superior properties make the MnZnO₃ material as promising candidate for new generation supercapacitor applications.     

A theoretically-based novel protocol for the analytic treatment of the glass failure stresses associated with coaxial double ring test method

With the aim of validating a new standardized Coaxial Double Ring testing procedure, without overpressure and with fixed geometry, an ad hoc theoretical approach has been proposed here to rearrange the laboratory outcomes accounting for the effects of the geometric non-linearities associated with such a testing configuration. By borrowing this idea, once the experimental values of the failure load have been determined, it has been possible to obtain an expression in closed form (fully defined by only two coefficients) of the maximum tensile stress (σ_max) in the core of the specimen. Following this, in order to make the laboratory outcomes comparable and homogeneous, the σ_max-values have been then re-scaled to a common reference condition (equibiaxial stress on a reference area, σ_eqbx), by means of the use of a correction coefficient (K) able to determine, under a condition of equal probability of failure, the effective area (A_eff) of the tested specimens. After being corrected to account for the effects of the stress corrosion cracking (static fatigue effect), all re-scaled data have been finally interpreted using a Weibull-type statistical distribution to determine the main fractile values of the glass strength. Doing so, despite some unavoidable approximations, this procedure furnished a highly effective means of determining the bending strength of float glass. Unlike the pure numerical approach proposed in codes and literature, which requires to correct the experimental data via FEM simulation, the rationale behind the proposed approach is in fact to elaborate the experimental data through an analytic treatment of the problem, which would greatly facilitate the interpretation of the data as well as the standardization of the testing procedure.